en
PH 1.10

All-tube turntable preamplifier

  • an all-tube turntable preamplifier for both MM and MC phono cartridges
  • nine tubes, one vacuum tube out of them used to rectify anode voltage
  • wiring circuitry without any global feedback
  • PCB`s utilize our premium CMT™ technology
  • absolute selection and tubes matching with above-average parameters
  • vacuum-impregnated transformer core
  • transformer potted in a special anti-vibration compound
  • we only use high-quality polypropylene capacitors in the signal path
  • if a turntable is fitted with two tonearms, one having MM phono cartridge installed and the other MC, both can be connected simultaneously without mutually affecting each other
  • hight variability of gain settings, resistances and capacitances settings for all types of phono cartridges
  • a high-quality step-up Lundahl transformer for MC phono cartridges

 

  • SRP 5.490,-€
Specifications
MM: 50,150,270,370,520,620,740,840pF / Gain: 46dB
MC1: 10,20,40,80,150,300,600,1200Ohm / Gain: 70dB
MC2: 2,5,10,20,40,80,150,300Ohm / Gain: 76dB
Output impedance: 100 Ohm
Inputs: RCA → MM / RCA → MC
Outputs: RCA / XLR
Total harmonic distortion: MM/MC <0,1 % / 1 VRMS
Subsonic filter: 18 dB/Octave
RIAA accuracy: 0,3 dB/20 Hz - 20 kHz
Signal-to-noise ratio MM: ≤72 dBV (87dBV – IEC -A)
Signal-to-noise ratio MC: ≤68 dBV (82 dBV – IEC -A)
Tube complement: 8 x 6922EH , 1 x 6CA4EH
Power: 230 V / 50 Hz / 70 VA
Dimensions (W x H x D): 435 x 170 x 485 mm
Weight (net): 17 kg